|
|
|
This filter option allows to see all known cell towers of a particular mobile phone network operator.
MCC:
Please enter here the Mobile Country Code.
The MCC defines the country where the network is located
MNC:
Please enter here the Mobile Network Code.
The MNC defines the network inside the country defined by MCC
If you leave the MCC parameter empty and just define the MNC parameter, then you will get all networks world wide with the selected network number.
If you leave the MNC parameter empty and just define the MCC parameter, then you will get all cells of all networks in the selected country.
Please note, that such cells might be seen up to 34 km in the neighbouring country.
|
|
|
Show newly found base stations with the following filtering options:
date from
all newly found base stations will be shown found since this day 0:00:00 UTC time; if this field is left empty, then today 0:00:00 will be chosen as default.
date to
all newly found base stations will be shown found until this day 23:59:29 UTC time; if this field is left empty, then today 23:59:59 will be chosen as default.
MCC
If selected only cells will be shown of the selected country.
MNC
If selected only cells will be shown of networks with the selected Mobile Country Code.
|
|
|
Show recently uploaded measurements:
time in hours (max 24h)
Please enter here the number of hours from this moment in the past to be used for selecting the measurements to be shown on the map.
The maximum time frame is 24 hours.
The time frame is selected from the current time the given number of hours to the past.
??? Chris: full hours or really exact x hours ???
|
|
|
Show measurements of a selected GSM base station
MCC:
Please enter here the Mobile Country Code.
The MCC defines the country where the network is located
MNC:
Please enter here the Mobile Network Code.
The MNC defines the network inside the country defined by MCC
LAC
Please enter here the Location Area Code.
The LAC defines a group of base stations belonging regionally together.
cell-id
Please enter here the cell-id.
The cell-id defines the number of the cell of which you want to see the data.
All four entry fields are obligatory. If at least one field is left empty, no data is shown.
Maximum Chris ???? thousand measurements are shown due to restrictions of the currently available web browsers.
|
|
|
|link=http://opencellid.org/#&action=filters.recentlyUploadedBaseStationMeasurements&time=24]]